ESR 50 AX25 ST - (With Sensor Monitoring) Malaysia
ESR 50 AX25 ST - (With Sensor Monitoring) Malaysia Axial Compliant Robot Brushing Robot Air Spindle Tools Malaysia Australia, Victoria, Melbourne Supplier, Suppliers, Supply, Supplies | XTS Technologies Sdn Bhd
Download Files
esr-50-ax25_60001345-2.stp (634.28 KB)
The ESR 50 AX25 -ST provides an axial deflection especially for brush applications combined with the ability to monitor the tool bit and/ or the wear of the brush by collision sensors.

The spindle is equipped with two inductive sensors. The first sensor reports on the axial travel of the spindle if the brush is in contact to a surface. This allows the robot to adjust its movement automatically and guarantees a steady contact of the brush on the surface over the complete brush life cycle.

The second sensor reports the maximum axial travel of the spindle. This protects the tool from a crash. The sensors make programming easier and avoid process failures and downtime of the system.

Technical specifications
2 Inductive sensors:
• Operating voltage 24 V DC
• Connection M8 connector
• Sensor 1 for detecting contact on the workpiece
• Sensor 2 for detecting the max. compensation or collision detection

 
Technical Data
 
Type ESR 50 AX25 ST
Air supply lubricated
Free speed 5000 min-1
Power 380 Watt
Radial deflection -
Axial compliance 25 mm
Exhaust air to front
ER collet 6 mm
Compliance force range 25 - 1000 N
Force of compliance max.* -
Direction of rotation clockwise
Noise level 80 dB(A)
Air consumption 8.3 ls
Weight 4.75 kg
Connection air supply (hose) ø
inside | outside
10 | 12
Accessories supplied Wrench
All data related to 6.3 bar working pressure.
Subject to technical alterations.


ESR 50 AX25 -ST提供轴向偏斜,特别是对于刷子应用而言,结合了通过碰撞传感器监控工具头和/或刷子的磨损的能力。
主轴配有两个感应传感器。如果刷子与表面接触,则第一个传感器报告主轴的轴向行程。这使机器人可以自动调整其运动,并确保在整个刷子寿命周期内刷子在表面上的稳定接触。
第二个传感器报告主轴的最大轴向行程。这样可以防止工具崩溃。传感器使编程更容易,并避免了过程故障和系统停机。

ESR 50 AX25 -STは、衝突センサーによってツールビットおよび/またはブラシの摩耗を監視する機能と組み合わせて、特にブラシアプリケーションに軸方向のたわみを提供します。
スピンドルには2つの誘導センサーが装備されています。最初のセンサーは、ブラシが表面に接触している場合、スピンドルの軸方向の移動を報告します。これにより、ロボットはその動きを自動的に調整し、ブラシのライフサイクル全体にわたってブラシが表面に安定して接触することを保証します。
2番目のセンサーは、スピンドルの最大軸方向移動を報告します。これにより、ツールがクラッシュから保護されます。センサーはプログラミングを容易にし、プロセスの失敗やシステムのダウンタイムを回避します。

#ESR50AX25ST #RobotAirSpindleTools #ロボットエアスピンドルツール #机械空气静压电主轴工具 #Australia #NewZealand #Malaysia #马来西亚 #マレーシア

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version